The magnetic damping tensiometer is a device which transfers the constant torque with the magnetic field as the medium. The damping disk does not contact the magnet, has no sliding friction, has a long service life, and the tension control is extremely stable. The installation structure is simple, the output torque adjustment is convenient, the structure design is compact, the volume is small, and it can work stably in various positions.
characteristic:
The attraction force of the magnet is used to generate damping effect. Since there is no contact and no sliding friction, the output torque is stable and durable.
Changing the angle of one of the magnets can obtain different attractive forces, so the adjustment is simple.
The transmission rubber wheel is made of slingshot rubber, and the enameled wire moves forward in a rolling manner to avoid scratching the film.
The rotating parts are made of light and tight materials with small moment of inertia.
Compact structure and convenient installation.
Adjustment items:
1. Before use, turn the scale to 9. While rotating the rubber wheel, gradually adjust the scale to 0, and then adjust it to the required scale. Otherwise, K characteristic will be easily generated and the tension will fluctuate.
2. Wrap the enameled wire around the rubber wheel once.
3. Measure the tension, adjust it appropriately and repeat it until the satisfactory effect is achieved. matters needing attention:
1. This product is assembled with precision parts. Please do not disassemble it.
2. The spring shall be as small as possible to ensure that the rubber wheel rotates and the line does not slip.
3. There should be 1 ~ 2mm clearance between the rubber wheel and the adjusting ring.
